Boost and Pyro Fittings

[BIG C]

I want to use my old pyro guage and boost gauge that I had on my PSD. The pyro had the band clamp holding the thermocouple in place instead of the 1/8" NPT and compression fittings. So I need new ones. I also need the boost gauge fittings and line. Can someone recommend a sponsor that could hook me up quick??



Thanks

 

[DieselMinded]

Contact Genos they may be able to help ya'



DM

 

[rbattelle]

How big is the boost line and what size NPT port are you trying to install it into? If it were me, I'd order a new tube fitting from here. Unless they have a distributor close to you, then you can just go pick up the fitting.



For example, a 1/16 OD tube fitting with a 1/16 MNPT end is part number B-100-1-1BT (brass). $3. 20.



Or, I've ordered a boost tube kit from Isspro in the past that included the aforementioned fitting.



Geno's doesn't seem real friendly to special orders... do they carry the boost tubing and fittings normally?



-Ryan

 

[BIG C]

How big is the boost line and what size NPT port are you trying to install it into? If it were me, I'd order a new tube fitting from here. Unless they have a distributor close to you, then you can just go pick up the fitting.



For example, a 1/16 OD tube fitting with a 1/16 MNPT end is part number B-100-1-1BT (brass). $3. 20.



Or, I've ordered a boost tube kit from Isspro in the past that included the aforementioned fitting.



Geno's doesn't seem real friendly to special orders... do they carry the boost tubing and fittings normally?



-Ryan

Thanks guys. I didnt realize it but JEGS carries the fittings I needed. Got them the next day and installed them the same day. Now its on to my other problems before I fire this thing up.