Engine/Transmission (1998.5 - 2002) boost elbow

[ilplumber]

Anybody have an edge boost elbow laying around they would care to sell? Had the ez in the auto with the turnbuckle method. Lost the elbow. Now have 6 speed and need the elbow. Thanks.



ilplumber

 

[Stroke This 24V]

Give me your Address

And I will send you my extra one.

 

[ilplumber]

Stroke this 24V,

You have a Private Message



Thank you! Thank you ! Thank you!Oo.



ilplumber

 

[RKohn]

Anybody got another one lying around???

92K and beginning to bomb.

 

[Big White Beast]

This may sound wierd but.......

Anyone got a stock elbow? After destroying the HY I put on a PDR HX-35. I have no way of not setting codes though if I ever have to take the EZ off.



Thanks, Garrett

 

[JR2]

Big White Beast - You should not need one with a PDR turbo. I believe (at least he did for me) Piers sets the waste gate at 35 psi. That is about all you want to get out of that turbo...



By the way, how did you destroy the HY, did it come apart??

 

[Big White Beast]

35 PSI is over boost on a stock truck.....

I believe anything over 20 PSI or so will set a code without a boost fooler or fueling box. My only concern is if I had to remove the EZ for some reason I don't want to set codes. I'm not worried about the amount of boost it makes. I can only get it up to 32 PSI with an EZ and DD2's.



Actually my HY is on my Honey's truck. When we were drilling for her pyro gauge the drill bit shattered. Through all my best efforts with a magnet and shop vac I still missed a little piece and it chewed up the turbines. Shavings from drilling probably wouldn't hurt as much as the hardened steel of the bit. Was just a tiny piece too but the clearance between the housing and turbine blades is almost non existent.



Hey if anyone has a spare HY they want to part with I won't need the boost elbow!



Garrett



#ad