Engine/Transmission (1998.5 - 2002) boost fooler for old Van Aaken

[silaskarl]

I have an older VA box without the boost fooler built in.



Does anyone know how to rig up a fooler for the MAP sensor.



My guess is that most of the ones sold for $59-150 are nothing more than a resistor to limit the MAP signal to the ecu after 20 psi of boost which in turn causes the ecu to defuel?



Thanks for the help!



Karl



2000 ram2500 club cab 4x4 5sp utilitybox VAbox amsoil AF... 8000lbs empty.

 

[ToolManTimTaylor]

Older VA's are 'da bomb (I Have an Old School Too) Any of which Use the VP44 exclusively and nothing more as they are timing advance only and non't monitor bost to tell it to add fuel. Foolers can be had for less than that of what you speak of tho.

 

[Bob Wagner]

if you do a search I believe it is a 2. 5vdc resistor.

 

[silaskarl]

thanks,

Do you know which wire on the map gets the resistor? I tried searching threads with no luck. Thanks,

Karl

 

[Bob4x4]

If you use just a resistor it will limit your fueling till you are above factory boost levels... ... ... .



Bob

 

[silaskarl]

thanks.

Does anyone know how to build a boost fooler, or have a schematic for one?

much appreciated,

Karl

 

[TurboDog]

PM me if you want to buy an old one I have from practical solutions that I am not using anymore.