Attention: TDR Forum Junkies Well, I got the Centramatics on but the bounce is still there. The rear of the truck starts bouncing/vibrating/shaking at 40mph, then goes away until I get to 65 and starts again from there. There are no leaks (yet) in the rear or the front end. Had both front and rear driveshafts rebuilt (short box so single driveshaft in the rear). Hubs feel tight when I pull on the wheels while the truck is on jackstands. I'm at a loss here. I've searched and read other posts on this but no answers were said. I'm gonna look into replacing all 4 wheel bearings. Has anyone had and solved this problem? Any suggestions? Thanks in advance!
Sorry, I'll add: 2002 2500 crewcab swb 4x4 6-speed on 285/75-16 BFG ATs
Sorry, I'll add: 2002 2500 crewcab swb 4x4 6-speed on 285/75-16 BFG ATs
