Attention: TDR Forum Junkies I just finished pulling the head off today and getting it ready to go down to R. J's Shop. I am so happy that I did it now because what I found on #2 and #5 head gasket ... ..... It was gone 
It didn't even miss or even run funny but it was blown out and I mean bad. It was in the oil passages where it blew out. What it did do was it put gasket particles in the rocker arm passages and now I need to get 4 rocker arms. :{ You could see were the head gasket particles was blocking the oil feed passage. This would be the second head gasket I replaced in about a year and a half. I was running about 45 lbs of boost with stock head bolts. Well it is a good time to get it o-ringed.
It didn't even miss or even run funny but it was blown out and I mean bad. It was in the oil passages where it blew out. What it did do was it put gasket particles in the rocker arm passages and now I need to get 4 rocker arms. :{ You could see were the head gasket particles was blocking the oil feed passage. This would be the second head gasket I replaced in about a year and a half. I was running about 45 lbs of boost with stock head bolts. Well it is a good time to get it o-ringed.
