Archived brake code P 0573

[EB]

I had a leak and lost all my power steering fluid. Needless to say, I had no power steering and also no brakes. The line that was leaking goes to the brake booster. I set a code, P 0573 "Brake Switch 1 High". Does anyone know what this means? Other than needing to replace the line, could something else be messed up. I am shut down until the parts get here.

 

[ThomasCook]

This is from the DC Powertrain Diagnostic procedures manual - I hope this helps you out!!



Symptom - P0573 - High voltage detected at the brake switch.



When monitored: While the ignition is on



Possible causes:

Brake switch shorted to voltage



Repair instructions:

Repair brake switch shorted to voltage

 

[ThomasCook]

I would dig around to see if you have a PS fluid soaked connector...

 

[EB]

Thanks for the response, I think I know what this code is about now, it has nothing to do with the power steering leak. I ran over some tree branches that blew off a truck in front of me about a week ago and it tore some wires off the back of my truck. Thanks again for the information.