Here I am

Archived Brakes!!!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived Lost boost and power

Archived Holy parts flying off CTD batman ...HELP!!!!!QUICK!!!

Status
Not open for further replies.
On my 95 4x4 ram. I put new front pads on. Then with the truck off i pumped the brake to get the pistons back out. Jumped in and started it, put my foot on the brakes and down it went. So i bled the brakes. the Right front bledder broke so i got a new calipper, bled the brake agine and with the truck off nice peddel. As soon as I started the truck and stepped on the brake down she goes. So i put on a new master cyclender. Bled it. hooked it up and bled it agine. Same thing. Got a differnt master and the same. there is no leaks. :confused: :confused: :confused: :confused: :confused: :confused:

Help.
 
TS, I'm not sure if your 95 is the same as my 97, but stand right in front of your driver side front tire. Looking under the hood, straight up from the upper shock mount, is a black rubber cap. Pull the cap off and there should be a little needle valve in the center of it. Push that valve and see if there's any difference. Hope this helps, Mike
 
Status
Not open for further replies.
Back
Top