Attention: TDR Forum Junkies Just thought i would post this for anyone with a Brakesmart controller from an older truck wanting to install it in the 4 gen. It took me a little while to figure it out, and only two fuses. The plumbing is the same, but the wiring is different. The Brakesmart has four wires-Black-White-Blue-Red. The truck has four wires-Yellow red stripe-Black-Green-White purple stripe.
Brakesmart*********Truck
--------------------------------
Black********to*****Yellow red stripe
White********to*****Black
Blue*********to*****Green
Red*********to*****White purple stripe
Stick
Brakesmart*********Truck
--------------------------------
Black********to*****Yellow red stripe
White********to*****Black
Blue*********to*****Green
Red*********to*****White purple stripe
Stick
Last edited:
