2nd Gen Non-Engine/Transmission Brite Box- Help!

[BHowayeck]

Installed new brite box- now I have no fog lights and the relay buzzes when I turn them on. Fuses are good. I took the brite box off and it still does it. Help!

Thanks, Ben

 

[Thomas]

Installed new brite box- now I have no fog lights and the relay buzzes when I turn them on. Fuses are good. I took the brite box off and it still does it. . .

I assume the relay you mentioned is the fog lamp relay in the Power Distribution Center.

For starters. perform the fogs-on-with-high-beams modofication shown at the very bottom of this page: http://dodgeram.org/tech/mods/electric/headlight.htm. A paperclip will make a quick & dirty jumper.

From the factory, the fog lamp relay is used an interlock, opening when high-beams are selected. The jumper in the linked modification mimics the closed relay that is present when low-beams are on and eliminates the electrical path through the coil of the relay (possibly the cause of your problem).

 

[dodgeboy01]

Is your truck from Canada? If it is, it will have a DRL relay which will need to be unplugged.