I am getting frustrated over air bubbles getting in my fuel gauge line. I am reading my pressure at the inlet to the VE44 from the filter house. I have Geno's banjo installed also. I am not sure if bubbles are getting in there from the VE44 pump or the Xfer pump ( I suspect cavitation is the source). My gauge will read erratic after about 1000 miles. More so when I am at 6000 feet or more. My fix has been to unbolt my pressure sensor and put it as low in the engine compartment as possible. I leave it there for about 30 minutes and this gets the air out. Bolt it all up and I am good for another 1000 miles.
My fuel pressure is good as I have check it with a mechanical gauge. My in-truck gauge is electric and a Westach.
Anyone have a long term solution for this?
My fuel pressure is good as I have check it with a mechanical gauge. My in-truck gauge is electric and a Westach.
Anyone have a long term solution for this?