Build Schedule/Fit?

[Mattm094]

So I just want to see what y’all think of this build I’m going through, and see if these pieces fit together well enough or if there are some tweaks that should be made? My truck is in the sig, I use it as a daily driver, so I want it to have reasonable street manners, be able to tow if I ever need it to, and make 600rwhp.

With what I’ve got, I want to add new 50hp injectors, head studs, and a holset cheetah. Is this a decent set up or should I rethink some things?

ps I’ve also got an ATS exhaust manifold

 

[Mattm094]

04.5 2500 4x4, HE351, 5” straight pipe, Swiss cheese airbox w/ fleetguard filter, Banks monster ram, FASS165, Smarty S06

 

[bcbender]

I had an 04 and I was running probably at most 320~350rwhp... (380 flywheel up from 305). For a DD or towing rig, I cannot fathom why in the world you would want 600rwhp... that is almost three times what the truck was stock and significantly more than new trucks are today.. My 20 with 400 fwhp is more than enough. So if that is your goal Id recommend you look seriously at the transmission, and drivetrain as you cannot put that much power down every day and keep it in one piece. Your sig does not indicate if you have a NV5600 or Auto.. but the NV5600 is not rated for that much power continuous, not even close... JM2C. Good luck.