2nd Gen Non-Engine/Transmission Bulb numbers

[rjones]

I need the bulb number for the wait to start and the heater control panel on a 96 ram..... please help Wagner lighting says its a pc74 which is way to big... ...

 

[Loren]

rjones,



My service manual is for my 1995 truck. It doesn't list the wait-to-start lamp, but it has about all the rest of them. The only two types used are the PC74 and the PC194.



If the PC74 is too big, then the one you want is probably a PC194.



For 1995, the heater control illumination lamp is a 158. That is probably the same for your truck.



No guaranties though; this is out of a 1995 manual and doesn't specifically list the wait-to-start lamp.



Good luck.



Loren

 

[rjones]

Yeh manual says 158 but its way to big, I had to buy them at the dealer 4. 00 ea. I bought 10 of them so I would have spares... . They are a pc type bulb but way smaller than a pc74 and pc 194 is way bigger than the pc74, sooooo... . a dealer we will go. They even told me pc74 and I said" there is no way", then after 10 or 15 min they finally found them which had to be special ordered