Here I am

Cable conection problems

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Alternator wireing info , im geting 17.25 volts help!!!!!!!!

transmission use

Ok this should be easy for any one that has done this before. I need to figure out a throttle cable for my 78 F250 to the TPS on the 03" cummins located at the front of the engine. Does any one know a good way to do this. Even a good place to get ends and fittings for that type of cable? The other cable problem is for my emergency brake. I put an 01" ford 10. 5 in the rear. The cable is a little to long and does not have the connection to fit in the old ford slot. So does any one know where I could get an end connector that would crimp on the new cable.
 
On the throttel cabel , here is a couple of ideas you might try , call a marine place that makes throttel cabels they might be able to come up with it . Or anouther option would be to swap the dodge set up from the 03 to your truck . But you might try calling ford since cummins are in stalled in F650's , also on anouther thought Case tractors have cummins installed in them and some of them are electronic engines .





On your E-brake cabel one option is to use part of your original cabel , get some cabel clams to fit the cable and the hard ware to make a loop

and simply conect the too together leave enough room for the cable noto hit any thing
 
Back
Top