Camper wiring

[Archive]

tried the search, came up empty... .



I need a wiring schematic for a lance camper... just what wire goes where on the seven pin plug.

 

[klenger]

Here's the pinout for the trailer connector on our trucks. It might help.



http://www.klenger.net/dodge/7-pin-connector-installation/index.html

 

[BTighe]

hey rob. good luck.

 

[jkalchik]

I've been told that the slide-in 7 pin connector is wired quite differently than the standard RV connector. My brother has one (not a Lance) and the center conductor is 12V hot.



There's nothing at http://www.lancecamper.com about the wiring unfortunately. Might be a good place to start, though.

 

[tgbol]

Rob

This might help you. http://www.marksrv.com/wiring.htm

For some reason I think the Lance uses the center (7) as the 12+

 

[ATClark]

With the plug slot up, looking at the plug on the camper:

the 1 o'clock pin is open

the 3 o'clock pin is right turn and stop - Brown - 16 gauge

the 5 o'clock pin is left turn and stop - red- 16 gauge

the 7 o'clock pin is 12 volt power - black - 8 gauge

the 9 o'clock pin is back up lights - yellow - 16 gauge

the 11 o'clock pin is running lights - green - 14 gauge

Center pin is ground - white



Hopes this helps

 

[LHartman]

Thank you Rob!! She's a beaut! White w/ blk & grey trim. ATClark, thanks. You're a life saver. Here in Post Falls now with the camper on. Will do a quick wire job to get me home, then wire in something more permanent later. Didn't plan on buying one today, but had to when they actually accepted the offer. Told them to throw in a torque lift at no extra charge and they agreed reluctantly. 1998 Lance 9'10" ... . very nice camper. Air bags next