Carli sway bar end link heim joint replacements

[Briman]

I need to know if anyone has outsourced the heim joints for the Carli sway bar end links. I need to replace mine. Is there a better joint then the original nylon lined joint. I also need to replace the bushings between the end link and sway bar. When I bought the end links they came without bushings and I found some poly bushings to replace the factory ones. I think they were Energy brand bushings. The bushings I bought are poly but were smaller then factory and not as stout as I would like. Any thoughts on part numbers and cost effective purchasing of either of these parts would be appriciated.



I also need to find a source for the UNI filter for a Scotty Ram Air III. Not so long ago I found a place that just sold the filter. I did not save the web page and can't find it now. All responses are welcome.

 

[Bob4x4]

The OEM rubber bushings have worked good for me. I would just call Carli's shop to get a replacement bearing. But I beleive this is who makes the bearing

FK Bearings Website



Bob

 

[mconstable]

These guys sell the Scotty, and offer the Uni for the Icebox intakes, so I bet they could hook you up with the right filter.

Diesel Cold Air Intake Dodge Cummins Cold Air Intake Cold Air Intake For Diesel Trucks Diesel Truck Cold Air Intake Dodge Cold Air Intake

 

[Briman]

Thanks for the help. I ordered the bushings from dodgeparts.com, dirt cheap. I already got an email reply from Jesse at Carli. He said to use the factory bushings as well and has the heims in stock. I got the UNI filter from the place mconstable recomended. I bought the entire Scotty RAIII for about twice the price of the filter it self, their closing them out I guess. Didn't really need the whole thing... . spare parts I quess.



This was a weekend for ordering misc. stuff for the truck. I also ordered the steering stabilizer from defiant. It is compatable with the drop blocks from Kore but I will be removing them and lengthening the end links the same amount. That should help the bushing last a little longer.

 

[mconstable]

Glad I could help