carlwest asks..."Need part # for KSB Sensor"

[BushWakr - RIP]

**Moved here by Moderator for proper/better exposure... ** pastor bob.





Spent two hours at local Dodge dealer and couldn't locate the

the # for the KSB sensor. They just gave up

Any help would ba appreciated. Also have loping at low idle. Will dye at low idle. Added extra spring for now to keep going.

Lots of slack in the throttle rod, will replace bushings, and throttle return spring. KSB silonoid working but not getting voltage warm or cold. Have 12 volts to KSB sensor, but not away to silonoid. Any other ideas?

 

[cerberusiam]

Try asking for an air temp sensor. I don't think they know what a KSB is. If I remeber correctly it was listed as an air temp sensor the last time I ordered one. There are 2 of them so make sure you get the one that has the correct plug. Good luck.

 

[Kernel]

Carl,



I can get you a Bosch number for the KSB valve going off the 10 digit number on your pump. Does the number end in 114 or 184? The injection shop called it a air temp sensor like mentioned.



Scott

 

[carlwest]

went back to dealer, asked for air temp sensor, thermo (etc) sensor, I looked at the dealers screen, nothing. God help the new Chysler numbering system. I ordered the throttle rod likage plastic ball ends, and got something else. They gave up on that too and actually asked me to try to find the number elsewhere. Hail TDR.



I have the number for the KSB silonoid, it is the #for the sensor I need.



Also the numbers for the plastic ball throttle rod ends.

Thanks again.

 

[Kernel]

I have the number for the KSB silonoid, it is the #for the sensor I need.

.

I should be able to get that one too. Let me know.



Scott

 

[AlK]

carlwest,

throttle linkage coupler



Seek and Ye shall find (Search function)



https://www.turbodieselregister.com...t=39994&highlight=Throttle+couplers+revisited

https://www.turbodieselregister.com...1&highlight=Brakeover+spring+throttle+linkage



Hope this helps with the numbers.

---

Al