Attention: TDR Forum Junkies My stock clutch was not up to the challange presented by the CaTCHER & my Mach 1. 5 injectors, so I took the plunge & bought a South Bend Con ofe. I had it insalled Thursday. Thank you Aron. It's a joy to watch a gifted gear head at work. Right from the get go it was smooth as glass. I can now push the go pedal t the floor. 
It's a real eye opener. The only glitch in the process was that I lost my 4 WD. 
Aron talked me through a trouble shoot over the phone It turned out to be the vacuum line to the transfer case, which got tugged & pulled out of the rubber elbow up out of sight under the cowel in front of the driver.
It's a real eye opener. The only glitch in the process was that I lost my 4 WD. Aron talked me through a trouble shoot over the phone It turned out to be the vacuum line to the transfer case, which got tugged & pulled out of the rubber elbow up out of sight under the cowel in front of the driver.
Last edited:
:-laf
. Peter did supply the clutch & a resurfaced flywheel on exchange but the install was done by Aron Howlett in Holman, Wisconsin.
