CB Bracket

[Archive]

I odered one of Michael Brolin CB Brackets(mbrolin103@aol.com)What a great item. This one is better than sliced bread,and will last longer. If any one out there needs a real CB mount this is the one. I could not mount the radio in a good place untill this mount came along. THANK YOU MICHAEL BROLIN!!!!

------------------
99 3500 5SP 4:10 Ratio Limited slip Camper/Tow Packages.

 

[Archive]

I second the comment. Now I need a piggy back to mount a decent speaker!

------------------
Charlie
Anchorage, AK
98. 5 2500QC 2WD Auto, Driftwood, no badges, Brahma - VABox, elbow, 4" exhaust, PacBrake, Firestone airbags & Monroe Reflex shocks

 

[Archive]

Can you post a picture, or provide a description or link?
Thanks in advance...

 

[Archive]

I got one of Mikes CB mounting brackets for the stick shifts. Fantastic product and reasonably priced!! Worth every penny! I've bought other products from venders on this site and feel that I've been hosed! #ad
This product is outstanding!

Great job Michael Brolin! #ad




------------------
"WHITE OBSESSION" 99 Quad Cab, White, SLT, 4x4, 5-sp, 3:54's, LSD, Loaded except cab lights and leather, Raven cap (cab high), Rhino liner, Stainless Nerf Bars, Stainless Rocker Panels, Tow package, Pro-flap mud flaps with Stainless Cummins "C" add to rear flaps, Power Edge (my first BOMB), Valentine One, Amsoil throughout, Uniden PC78LTW CB Radio with Mike Brolin's CB mounting bracket for STICKS. Hadley Bully Air Horns. Psychotty Air Induction, Braided SS Fuel Lines.

Things to come;
285/75R16 Cooper A/T's, SPA Pyro and Boost gauge, 4" exhaust system, DDIII's.

NRA Life Member! (Need to protect our rights and FREEDOM!!)

 

[Archive]

I too am very happy with my (auto. ) CB bracket made by Mike Brolin. #ad
I have finally got everything but the CB radio together to complete the installation. The "enhanced" CB is on its way. #ad
I would like to thank Mike Brolin for the trick CB bracket, Mick2500 for his expert CB advice and James Brown who turned me on to a CB shop that obtained most of my "special" goodies as well as others on this board (including Rob Hanson) who helped re-educate me on CBs. #ad
#ad
#ad
#ad


------------------
'98. 5 2500 QC 4x4 Sport, Glasstite Vision II, 285 BFG A/Ts on M/T Challengers, Warn 4X Boards, Mopar fender flares & tow hooks, NW Custom s/s-rubber mud flaps, Mag-Hytec diff. cover & trans. pan, Edelbrock IAS shocks, Reese Titan V hitch, VDO Vision gauges, Dynamat, '00 Sport grille & valve cover, '00 Sport headlights/PIAA Super White bulbs, PIAA Dual Sport 900 aux. lights, BD exh. brake and TorqLoc, Prime-Loc, Amsoil Dual Bypass, Bosch 275s, VA CPC, (censored), Banks 14 cm2 turbine housing/Big Head wastegate actuator, ATS 3-piece exh. man. , Banks 4" dia. s/s exh. sys. , BD V10/Cummins hybrid TC & valve body, BD trans. front pump & PressureLoc, Air Bulldog induction hood (with NACA ducts), plus MANY other trick modifications

 

[Archive]

I can only second all the comments about Mike, great product and person.

Have a question for those of you out there that might know. Where do I get that flat antenna mount (has a slight bend in it) that mounts to an already exsisting bolt under the hood, about 12 inches down the drivers side and requires no modifications, holes drilled or alterations to anything but running the cable to the CB. I saw one and haven't been able to locate one since. Currently using a magnetic mount. Thx.

------------------
Y2K RAM 2500 4X4 QC LWB Patriot Blue 5-Speed 3. 54 LS rear end, Trlr. Tow & Camper Packages, Westin Nerfs and DC Mud Flaps. Stock, ALMOST

 

[Archive]

You can find the Antenna mount at Firestick.com It is made for the ram. Put one on my truck. Used the open hole across the hood from the radio antenna. That moved it back out of my line of sight.

------------------
1998 12V Quadcab,BDTC,BD valve body,torquelock,230 plate Thermowrap.

 

[Archive]

RGAMBLE, THX!!. that is exactly what I was after. Sure appreciate the come back.

 

[Archive]

One of the trick CB accessories James turned me onto was an upgrade over the Firestik stainless steel hood mount. This locally made brushed stainless steel (hood) mount is fabricated by Select Accessories (no address listed though). The quality is quite a bit better than the Firestik counterpart. Another cool accessory is Firestik's coax cable (9' or 18') which features their trick Firering connector (at the antenna mount). #ad