CB Mounting Bracket in Demand

[mbrolin]

I am receiving a good many requests for the CB mounting bracket. Even though I posted that I no longer make them the demand is increasing. So heres the scoop. I am willing start production again but it will not be until June. The brackets work on stick and auto models,use the existing center seat bolts to hold them in place and will hold larger CBs. The CB mounts in front of the center seat,will not interfere with the cupholders or the 4wd stick. I have pics that can be emailed. I could post them if someone gives me instructions on how to do so. email for pics otherwise

------------------
2001 HO 6spd,Quad cab,LWB,4x4,Flame Red,all options except for leather,Westin Brushguard/Push bar,Painless wiring,Radio Shack CB,my own design CB mount,Smittybuilt nerf bars,NW Custom rocker covers,Custom built stainless rocker light bars,DeeZee bedrails,Isspro pyro and boost gauges,Jacobs ebrake,Reese 20k 5er hitch(more to come)

 

[PUFF00]

Here is Mike's bracket. I've included a lighter picture of the auto-bracket for those who cannot adjust their monitor brightness--the original is a little dark:

#ad



#ad



#ad


------------------
2001. 5 3500 QC 4X4 6-speed HO 3. 55 black
1998 Jeep TJ black http://www.nm4w.org/members/puffer.htm



[This message has been edited by PUFF (edited 04-28-2001). ]

 

[Blkdawdg]

I WANT ONE, PLEASE!!!!!

 

[willyslover]

Mikey. . put me on your list for one
thanks Gary

 

[OILBRNR]

Mee too

------------------
'99 2500 4x4 • SB • QC • 3. 54 • LSD • AT • Leather • Mag-Hytec • Westach Guages • Line-X • Luverne Nerfs • Tommy Gate

Towing:
'99 28' Airstream Excella (~7000# dry)
'69 24' IMP Inca Twin Screw (~6000# wet)

 

[Driftwood Ram]

Add me to the list please.

------------------
96 2500 4x4 Driftwood auto DTT TC & VB Smart Controller Pac Brake Stan's 4" exhaust turbo to tail Warn 4x boards pyro,boost,trans temp on a piller, mag hytec trans pan, Reese 15k 5th wheel hitch Pulling 200 Alfa Ideal 31RL

 

[drag racer]

I'm in... e-mail forthcoming

------------------
'99 3500 QC, 4x2, AT, 4. 10 LSD Dana 80, towing/camping package, Mag-Hytec DD trans. pan and rear cover, Auto Meter gages w/ pillar and dash pod, Cobra CB, Air Lift SD air springs, Glasstite camper shell

 

[Alan Reagan]

Allright, Michael. You got me. Put me on the list.

 

[Bumble]

Add me to the list too Mike!

------------------
2001, 3500, 5sp, 3. 54LS, 4x4, pyro and boost on the A-pillar, 165 watts of backup lights, Thomas powered on-board air system, Grovers.

 

[nixter]

I was hoping for this to happen... Me too please.

------------------
2001. 5 QC,4x4,LWB,AUTO,3. 55,LSD,Bright Metallic Silver, -- email address removed -- Member:NRA, Teamsters Local 695

 

[T.Fogie]

Me too... ... ... ... ... . Me tooooooooo!!!!!!

------------------
DEBEEST, 99 QC 2500, SLT, 4X4, LWB, 5 Spd, Rhino Liner, Mobil Delvac 1 5W40, Auto Trim Design Runningboards, Les Schwab Wild Country Radial APTs, Pillar mounted ISSPRO Boost Gauge and Pyrometer

 

[Turbo Horseman]

How many tons of Canadian pennies would I need to gather to get one of the mounts?

 

[TomGolden]

I am planning on adding a CB to my truck this summer, but don't yet know where to mount it. So I would at least be very interested in seeing a picture of this bracket and what it looks like mounted in the truck.

Tom

 

[mbrolin]

Thanks for the interest in this item. Please email me directly for further info. I will start taking orders June 1st but I will be more than happy to put your name on the list. All orders are taken with direct emails to me directly. Thanks for your response. BTW,Puff is willing to post pics that Ive sent him.

 

[Red360]

Put me on the list!!!!

------------------
2000 24V, 6-speed, Flame Red, Agate leather, 3500 QC, 4X4, SLT+, 4:10's, LSD, AMSOIL Air/Oil filters and all Fluids, 275 RV squirters, S. S. nerf bars, Line-x, Autometer Ultralites Pyro/Boost gauges, MOPAR tow hooks, Rancho 5000 steering Stabilizer, Rickson 19. 5's with Cooper C-140's.

 

[jstyer]

I bought one of Mikes brackets last year for my ,99 auto. I have since purchased a 2001. 5 HO ETH and have installed it in it. Owners of 6spd's and I guess 5spd's take note: You will have to shift the mounting of the CB bracket to the driver side (off center) for clearance Of the shift lever and the built in drink holder, but other than that, it looks and works great. Mike makes a fine product.

------------------
'01. 5 2500 QC 155"WB, White, 4x4, ETH/DEE, 4. 10 LSD, SLT, All power, Trailer , Plow Prep and Camper Special Group, Keyless Entry, Flip-up Towing Mirrors, Lund Window Deflectors and Running Boards, Profile Plus Bug Shield, Century raised top cap. Soon to be Banks Git Kit, Banks pyro & boost guages and VDO fuel pressure guage.

 

[mbrolin]

You are correct. There is a problem with installing the auto bracket on the newer sticks. Thats why I make and sell 2 different brackets. The stick bracket sits higher and is offset to the left to compensate for the transmission tunnel cover. I should add that the cupholders are still useable.

 

[CGoyette]

I want one but how do you get one on order with Mike Brolin? Anyone have his email or phone number



Mike I want one how do I get ahold of you?

 

[stg2500]

I have just contacted Mike about ordering a bracket.



Just go into his profile in the first post of this thread and you can either e-mail him or private message him.



Hope that this helps.

 

[Silver Streak]

CB Bracket

Will this work on a 96? Also will it fit if the middle seat compartment is down? Can you give me price and get back to me.



email me at -- email address removed --



Thanks



Silver Streak