CCV Fitler location

[DBoudreaux]

Does anyone have pics on where the ccv fitler is located??

 

[seafish]

On the 5. 9L CR it is underneath the plastic valve cover shield, on top of the actual aluminum valve cover. Plugs into a hole in the valve cover with an o-ring, like the old PCV valves on gassers.

 

[Simplysmn]

If you pull the plastic cover that is on top of engine then you will see I believe that there is 8 bolt's that hold down the little cover under that is the filter very easy to remove n replace . n Geno's has them also

 

[Cosmo]

#ad


See the plastic piece with the writing on it. It's under there. Shouldn't take more than 5 minutes to swap.

 

[DanSullivan]

Good info. need to do this myself. and did not know where to look. So nice to have the TDR for good info. Thank You

 

[DBoudreaux]

10-4! Got it. Took pics, will post soon.

 

[seafish]

10-4! Got it. Took pics, will post soon.

That'd be great... I have pics of the Enviroguard breather filter under the valve cover shield of my 5. 9L... it'll be nice to see if they are the same or not.

 

[Cosmo]

The 5. 9 filter is significantly smaller, iirc.

 

[seafish]

The 5. 9 filter is significantly smaller, iirc.

Interesting... thanks... it'll be fun to compare pics.



Here is the 5. 9 Enviroguard underneath the upper valve cover--

 

[Cosmo]

Oh, yeah. That's MUCH smaller than the 6. 7 filter. The 6. 7 fills nearly the entire cover.

Here's a pic of the 6. 7 filter:

#ad