Changing a dash bulb...

[Bluebird]

I thought changing a instrument cluster light bulb would be easy... The Chrysler bible says pull the cluster, but I can reach the left lower side (not burned out) and the one next to the speedometer (burned-out). No way could I loosen either one from up-under the dash. I don't want to pull the instument panel less I screw-up some other wires. All works well right now except for one dash illumination bulb, (size-PC194). Any one else ever get one out from under the dash?



Thanks in advance, Patrick.

 

[MFalkinham]

I tried changing a burned out dash bulb without removing the instrument cluster, but just couldn't do it. I ended up removing the entire cluster, which allowed me to give the guages and plastic lens a good cleaning as well. In the end, it was worth the extra effort to me for a well-lit, clean looking instrument cluster. Good luck!

 

[Grey Wolf]

MFalkinham,



I did the same thing, plus I changed all the bulbs while I was in there

 

[bgilbert]

Grey Wolf is right, while you're in there change all bulbs. Piece of cake taking the cluster out on our first gens. Bill . . 7:00pm Sat night 4x4 Diesel pulls at Scheid's event, can't wait, went down there Fri night, lets just say there was plenty of Stacks. .