Engine/Transmission (1994 - 1998) classified ads

[b.ferrara]

I've been a member for 4 years, pay dues, and yet when i put an ad in the classifieds it alerts everyone with all these asterics ***not tdr member***

go figure. Anyways I am a member and yes my truck is for sale.

 

[Grizzly]

Good for you. Tell us about it. How many miles, color, condition, so on. Post photos.

 

[b.ferrara]

It's a 97' club cab 4X4 with a blumenthals nv4500. It also has a blumenthals

hd241. I recently put a new front end in it, ball joints tie-rods etc...

Has a TST #11, pac-brake, and the Tst tab fix for the dowel pin.

while I had the front cover off I did the cam shaft seal, had the radiator gone through and all new hoses and belt. It has 19. 5 ricksons, low profile tool box and 5" stacks. I also put new carrier in the rear and the mag cover. so the drivetrain with the exception of the motor has less than 10k. the motor has 295k

It also has ranchand bumpers front and rear. I want 15k the way it is, it's snowing here so it'll be a few days for the pics. I also put the 60lb exhaust springs and new valve cover gaskets. truck is definately worth what I'm asking

I need to buy a crew cab, so this has to go. I am negotiable.

 

[b.ferrara]

I forgot the most important thing, black with gray interior

truck has no rust, just needs the front hood painted, it faded, but I'll do that before I sell it.

 

[XJSuperman]

Wish I was closer (I'm hunting me a truck) and had a few more bucks (I almost have enough). Should sell nicely.

 

[b.ferrara]

how far is ocala from Daytona, I leaving for Daytona Sunday after work. I was going to ride down and have someone trailer back but could deliver truck instead of riding down.

 

[XJSuperman]

Sent you a PM.



Ocala is 70 miles due east of Ormond beach which is directly north of Daytona (literally right on top of it).

 

[Bob Wagner]

if you shoot a pm to robin, I bet she would fix your problem in a heartbeat



Robin's email address is rpatton@ix.netcom.com



HTH

 

[Steve St.Laurent]

When you enter an ad if you are logged in to the site it will automatically enter your ad as a TDR member. If you are not logged in it will prompt you for your TDR forum username and password - if you enter those your ad will show up as a TDR member ad. There is a large note with flashing exclamation points talking about this when you enter your ad (if you are not logged in). Here is what you'll see:



#ad




If you do not enter the forum username and password if it's prompting you for it then the system has no way of knowing if you are a member or not. If you are logged in to the site it will automatically register that.

 

[GAmes]

A little off subject but have you ever towed heavy with the ricksons?

I'd like to go to 19. 5s but I'm afraid that they will not complement my 3. 54 gears when hooked to big trailers and hill climbing.

 

[XJSuperman]

I've never towed with Ricksons... BUT I know you can get 19. 5 tires that are nearly stock height... therefore should not effect towing at all if you stick with that size.

 

[Nate]

It did that for me, even though I was logged in on this site. When I did like the directions, said, it just said my username or password was incorrect. I ended up just signing up like I wasn't a TDR member.

When you enter an ad if you are logged in to the

site it will automatically enter your ad as a TDR member. If you are not logged in it will prompt you for your TDR forum username and password - if you enter those your ad will show up as a TDR member ad. There is a large note with flashing exclamation points talking about this when you enter your ad (if you are not logged in). Here is what you'll see:



#ad




If you do not enter the forum username and password if it's prompting you for it then the system has no way of knowing if you are a member or not. If you are logged in to the site it will automatically register that.

 

[b.ferrara]

I don't tow alot, but the few times I pulled my camper, I had no problems.

I usually pull w/wifes van due to family vacation. 400k yeah, I tell you with all the work I've done to this truck I'm an idiot for getting rid of it. It's been 4 years and wish I kept my 1st gen, 4 years from now I'll be wishing I kept this one. I should just buy a 1st and 3rd gen and have the whole set. I'd like to at least turn 300k before someone buys it, the first gen had 240k and I always said i'd get 300k out of this one.