Cleaning turbo blade fins

[JTBMC]

HELP Cleaning turbo blade fins

How or what product should I use to clean K&N filter oil from my turbo blade fins, I must have over oiled at last cleaning of the filter. I've replaced my k&N in the stock air box w/ the NAPA 2790 Mopar Guy Big Honking Air Filter.

T. I. A. , Tom

 

[EMDDIESEL]

You can just wipe them carefully, or just use some Qtips, it wont take long.

 

[JEMOORE]

I doubt you would have to worry about cleaning them. After a short time running the heat from the exhaust will be all that is needed.

 

[JTBMC]

Thanks i was thinking about spraying throtle body cleaner in there but was unsure if the stuff would damage any thing.

 

[Chad Sheets]

Do not use ANYTHING flamable at all. I would just use a lint free rag... no solvents or cleaners at all.

 

[JTBMC]

Thanks Guy's I'm going to clean them this morning with a lint free rag. there no real oily it's just a slight dark film over the blades & in the throat on the air filter side.

Thanks Again, Tom