Engine/Transmission (1994 - 1998) Clutch problems

[BrandonThompson]

I replaced the slave cylinder about two weeks ago. It now appears that the master cylinder is bad as well. My question is this: how can you bleed the system. For some reason dodge did not put a bleeder on the slave cylinder. I called dodge and they sell the entire setup for 345 no bleeding required. I would rather spend 100 on the master if there is a way to bleed it. Please help me with this, not sure which way to go.

 

[dieselburner]

Brandon, You need to pump the pedal to get out the air. It takes a long time and alot of patience. It also helps if you get the truck on some hills to get the air through the high spots in the line.

 

[BrandonThompson]

Thanks for the info. Installed the new master cylinder today and it works like a charm. Left the line off the slave and pumped it up. Then filled the slave and put it back together. Thanks to dieselburner i saved 250 bucks. Thanks for the input.

Brandon