code 2269

[tobaccogrower]

what is it?

i noticed the truck hesitating with the ramifier hooked up and checked the codes. 2269, and 0069. check engine light is not on anymore but codes are still there? what gives?... . james

 

[bpenrod]

Try a search as many threads have links to the codes. Are you still running the Ramifier and if so how do you like it?

 

[JWillms]

coudnt find 0069 but found 2269

P2269 Water in Fuel Condition

Justin<><

 

[tobaccogrower]

i also have code 0652

i think thats the code that is causing the shaking the truck with the chip on. it comes up with the 3 cycle procedure!... . james

 

[rbattelle]

P0652 - Low Voltage at the #1 Sensor Supply Circuit

Possible causes:

-#1 5-volt supply shorted

-ECM

-#1 5-volt supply shorted to ground



This is telling you that the #1 5-volt supply pin at the ECM is putting out less than 5 volts. You'll need to check it for a short. It's pin number 25 in ECM connector C1 (refer to attached picture).

If there's no short there, your ECM may be toast.

 

[tobaccogrower]

that figures...

this truck(600) seem's like it's not as powerful as i expected. i've gone through 3 ramifiers and as soon as i put it on the truck developes problems. thankfully the guy's at TS performance are working with me to fix the problem. great company to deal with! i hope the dealer can fix the problem. it goes in tuesday..... james

 

[EEngel]

3 Ramifiers?

tobaccogrower,



What problems are you seeing when you tried the ramifier box?