Here I am

Codes After Installing Juice

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

FASS or WALBRO?

Is the intake on the 05' CTD same as the 06' CTD?

Status
Not open for further replies.
Just installed a Juice with Attitude this afternoon on my 04. 5 that I got a week ago. Got it all installed, started the truck, truck sounds fine, but check engine light came on. Pulled the codes and came up with 0237, 0069, and 2509. Took the truck to Autozone to see if they could clear the codes but their scanner wouldn't clear them.



Any ideas as to what I can do to clear the codes and get rid of the CEL? Any problem with driving the truck with these codes?
 
I would try to reinstall the connectors and inspect for bent pins. The 237 is boost pressure voltage low which means the PCM isn't probably seeing a signal which would also explain the 2509 code. If those codes are active you won't be able to erase them as they will happen over and over. I wouldn't run the truck until you get them resolved. I have no idea what the 69 code is.
 
Status
Not open for further replies.
Back
Top