Here I am

COMPLETE Third Gen Factory fog light set with wire loom

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

1997 Kountry Star 5th Wheel

Two Tailgates/ Fifth Wheel and Black Tail Gate with dent on top

Status
Not open for further replies.
COMPLETE Third Gen Factory fog light set with wire loom PRICE Dropped $30.

LAMPS are now listed on ebay and not for sale here. go to ebay and search item 300988741259
I am selling my FACTORY, Hella fog lights, lower light wire loom and both plastic inserts. These are FACTORY Hella and NOT Chinese crap. Both work, no big chips on the glass and they don't leak water inside. The wire loom has both lamp plugs and the only plug missing is where the loom plugs into the trucks loom behind the washer bottle under the hood. Comes with the 6mm bolts to mount the lamps.
IMG_1916 (960x1280).jpg
IMG_1915 (1280x960).jpg


IMG_1916 (960x1280).jpg


IMG_1915 (1280x960).jpg
 
Last edited:
My brother is looking at them, and his 06 would need a new switch. The 03-05's all pull out, the 06-07 are a separate switch.
 
My brother is looking at them, and his 06 would need a new switch. The 03-05's all pull out, the 06-07 are a separate switch.

Oh sure, they WOULD have to change the simple things. :( Hopefully its just a switch and the harness is there.
 
Sorry guys, for some reasons I wasn't getting notified about replies to my ad. My '07 has the switch incorporated into the HL switch. My '07 you push the HL switch. The wire loom provided is the lower loom that has both lamp plugs and lays out on the inside bottom of the front bumper. There is only TWO wires at the end of the loom a HOT and GROUND. The loom terminates up close to the trucks TIPM. A simple rocker switch would suffice.

EDIT: There is TWO complete looms less the junction plug, just two wires.
 
Last edited:
If the truck was not built with fog lamps it will require for the option to be added in the corporate data base then reconfiguring the tipm. Or use an aftermarket switch and relay set up
 
For those reading I looked at the HL switch in my brothers 06 this last week. He doesn't have fog lights installed, and the switch does not move.
 
We just had the local dealer install factory fog lights in our early 2004 today.....we now have a separate rocker switch located just right of the headlight switch. All seems OK, but should they have done any re-programming? This truck did not come from the factory with fog lights.
 
Status
Not open for further replies.
Back
Top