Engine/Transmission (1994 - 1998) connecting cruise servo vacuum.....help.

[LPreddie]

Is there a trick to connect the cruise vacuum hose without removing too many parts. I can't reach all the servo bolts and the battery tray bolts are very rusty. I barely got one of the battery tiedowns undone without it snapping off. Any help.....

 

[Turbo Thom]

I'm not sure but try to go at it from the under side of the truck. I took my tray off.



. . Preston. .

 

[Bob4x4]

It can be done,it is very awkward. I never pull the servo to change out the hose. If you cant get the hose nipple off the barb,cut it with a razor blade the new one will slip on easily.



Bob

 

[Andy Morrison]

Take the battery and tray out . I don't think you can get to the servo with out removing them. New battery hold down bolts should not cost very much and if they are that rusty they need replaced anyway.



Andy