Here I am

Console Cover

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

304 Stainless intake plenum ??

A new concept of diesel flat block engine

NEW PICTURES BELOW!!



What is a “Console Cover” you ask?



Well, if you're like me and live in a 'hot' part of the country (Phoenix to be exact), have you ever gotten into your truck and placed your forearm on top of your center console only to have the first two layers of skin scorched off? Then again, if you live in the 'cold' part of the country (say Alaska), have you ever gotten into your truck and felt your forearm was going to freeze to it? This product is a blessing when it comes to this alone, as it is similar to sitting on a cloth seat.



Well how about a "Console Cover"? They are great for keeping your forearms from the “Holy cr*p that's hot/cold” words we all mumble. Along with protecting your skin, they will also protect from damaging UV rays, sharp objects, or involuntary damage.



Or, do you have a console that has seen its better days? Is your console ripped, stained, cracked, or otherwise unsightly? Then the “Console Cover” is your easy answer.



Have you ever picked up the 'to go order' and you get half way down the road and realize you have no napkins? Or have you ever eaten your lunch on your center console? Well, instead of wiping your hands on your seat, pants, shirt, etc, and we all have, you can use your "Console Cover". I have used this 'feature' many times. It is also semi-absorbent to help prevent the occasional spills from making a bigger mess than necessary.



This product is easily installed under a minute and fits snugly around the console. When needed, the “Console Cover” can be removed and machine-washed. The “Console Cover” does not hinder the operation of the opening and closing in any way, and will stay in place when the console is open.



The "Console Cover" IS available for ALL Dodge Trucks, 2nd Gen (94-02) and 3rd gen (03-Current) in various colors (Dark grey, light grey, CAMO, etc. )



Product NOW AVAILABLE/SHIPPING



#ad


#ad


#ad
 
Last edited:
Keep me posted I might want one just so my dog dont tare it up. I cringe everytime I see his nails dig in a little
 
Any particular color you are interested in for the cover? As you can see mine is black, but I'm looking for feedback from individuals. Let me know and I'll get something going for you ASAP.
 
Its Grey. How much you figuring they gonna run?



Grey it is. PM me your info and we'll get things worked out.



Still working on price, it's not going to be unreasonable, I promise. The more interest I get the cheaper they will be. I would just like to get some out to people first and see if they are something people would like. I'll probably give the first couple people some price breaks just because of the initial interest. ;)
 
Looking at the picture you posted... ... . it appears that the cover just lays over the console lid..... does it fasten down some way??



If loose..... my Beagle pups would have it off in a sec:eek:
 
That's what the picture has you thinking? Good, that's how it was designed. No fastners in sight, yet still easily removable in under 30 seconds.



To answer your question, YES, it is securley held in place so your beagle pups/or kids cannot rip it off. Yet, if/when you remove it for whatever reason(possibly wash), you will never know it was there. That's something I like about this design and other products with a 'sano' design.



Questions/suggestions are welcome.
 
SpunkysRam:

I have been using a piece of hard rubber backed carpet tile in a similar fashion as to what you are showing, for the past 3 years. I like what you are proposing as it looks more finished. My interior is black so found a piece of black carpet tile. It doesn't move around due to the rubber backing when the dog is sitting on it, but can move around when nothing is on it.



Comments:

1. Your design turns down on the sides for complete coverage, but leaves the front and back exposed. The only damage I have to my console is on the back edge facing the rear seat where the dogs toenail caught the edge as he was jumping onto the console from the rear seat, creating a very small tear. You might want to consider creating a turned down edge for the front and rear, similar to the sides, and provide additional protection.



2. How heavy is the material and is there any padding under the material at the console top? Not able to tell from a picture.

Of course something like a piece of carpet tile underneath would allow a user to provide a possible greater level of protection if needed.



I would be interested in your product, black, and with turned down front and rear edges, dependant upon price.



Let me know, PM if necessary.

Great idea!

Thanks

Jim
 
I really like that it is securely fastened... ..... I would also like to see the front and rear edge covered... ... . if that is possible I would be very interested in one.
 
Simply,



What color Grey are you interested in? Light grey or dark?



Ratler,



Working hard on the front and rear cover. Thanks for the input.



I should have a couple out by the end of next week to a few people who expressed interest eariler this week. Hopefully I'll get some good feedback from these people. By all means, if you are interested, keep it coming. Working on quite a few different ideas right now.



Thanks TDR!!!! Ya'll rock:)
 
Simply,



What color Grey are you interested in? Light grey or dark?



Ratler,



Working hard on the front and rear cover. Thanks for the input.



I should have a couple out by the end of next week to a few people who expressed interest eariler this week. Hopefully I'll get some good feedback from these people. By all means, if you are interested, keep it coming. Working on quite a few different ideas right now.



Thanks TDR!!!! Ya'll rock:)







Well I have a 2008 qc so I will double check I believe it's the lighter grey

Thank's again



Val
 
Val,



So I'm pretty sure that's the lighter of the two grey's? I just sold the last 2 light grey's I had so I'll have to get on made to get it shipped to you. Sometime next week if that'll work? Just let me know.
 
Back
Top