Cp3

[WDimig]

wade sells fully assembled NADP transmissions, robert has installed the full billet transmission in wade's truck, the transmission is having pressure problems, a new pressure sensor was installed and made no difference, as far as i know, another transmission is on it's way, and will be swaped out. i have seen wade's truck, his setup is something that no one has seen before, and thats all i will say, and just like everyone else here i want to see the numbers this truck will lay down, once they get the problems solved, and a little tuning, i gauruntee some impressive numbers.



wes

 

[Diesel Power]

the highest hp on diesel is bretts 800+ pull at MM-- that truck would easily top 900 or better if he had the electronics he needs.

 

[Diesel Power]

As for the solid transmission---DC has had a bad batch of govner pressure solinoids and i have found a few---if you know anything about the auto transmission, when the PS goes it drops line pressure and no matter what your doing it will ruin you transmission, it will slow fluid flow and clutches start to slip and you name it it happens---even once it happens the clutch material from the first bad PS will cause reaccuring problems. i can tell you that when i first got the transmission, it was better than a stacked computer set up---it would break loose into third gear and would slam you in the seat in 4th lock-up. i know his transmission is worth every bit of money spent, plus nadp took care of another fully built transmission, and i did not pay a thing.

 

[Morse]

A guy at the strip here took a brand new mega cab 4x4 with a stick and did a 15. 6 with a crazy larry only. . He had only had it a couple days. . When he pulled back in the pits, the smell of clutch was "very" strong. .

 

[WDimig]

he obviously had some shifting problems :-laf , trust me robert and me have given the new G56 transmission a thourough beating, and its held up, many times, i think he can see better than a 15. 6, my dad's truck has an auto, the edge juice and EZ stack, and robert pulled on me just a bit from a dead stop, i was quite amazed.



wes

 

[RobertP]

stop it i dont know how to shift

 

[WDimig]

you and me both know you know how to shift! Oo.

 

[lmills]

Robert, you need a clutch. :-laf. I leave in 3rd sometimes with my FE. It doesn't like it, but it only has two choices... ... ... take it or drop. :-laf

 

[Bob Wagner]

the highest hp on diesel is bretts 800+ pull at MM-- that truck would easily top 900 or better if he had the electronics he needs.

Richard Brown took the high hp trophy at 2006 May Madness.

 

[lmills]

Richard Brown took the high hp trophy at 2006 May Madness.

Actually, he did rather well, but it was not on #2 alone. His numbers were still very impressive none the less.

 

[Diesel Power]

you and me both know you know how to shift! Oo.

did rob tell you that he accually beat my truck before the transmission and turbo upgrades :-laf

 

[WDimig]

oh yes and the 250% slip on the attitude monitor :-laf :--)

 

[Diesel Power]

oh yes and the 250% slip on the attitude monitor :-laf :--)

yea that was nuts--rob is a fast shifter though

 

[RobertP]

cmon guys. you make it sound like i drive a manual truck or something. every one knows how i feel about auto's :-laf

 

[WDimig]

ssshhh! your truck might hear you! :-laf

 

[RobertP]

you might be right its home for the first time in 2 days. :-laf

 

[michaelRitz]

BREAKING NEWS

My 05 CTD 6 spd

1157hp

2379ft/lb on Joe Blow's Dyno located in Cummins Heaven, USA

HA HAHA HA HA HA Maybe one day. I talked to a lot of different fellows and it seems a lot of guys know a lot. Let's not try to be haters but join in unison singing 'Oh Cummins Night' ha hah ha Just get along we are all TDR members

Keep up the good work, everybody.





P. S. I also ran a 9. 37 173mph 1/4mi @ Joe Blow's 1/4 mi strip



HAHAHAHAHAHAHAHAHAH Oo. Oo. Oo. Oo.

 

[Diesel Power]

BREAKING NEWS

My 05 CTD 6 spd

1157hp

2379ft/lb on Joe Blow's Dyno located in Cummins Heaven, USA

HA HAHA HA HA HA Maybe one day. I talked to a lot of different fellows and it seems a lot of guys know a lot. Let's not try to be haters but join in unison singing 'Oh Cummins Night' ha hah ha Just get along we are all TDR members

Keep up the good work, everybody.





P. S. I also ran a 9. 37 173mph 1/4mi @ Joe Blow's 1/4 mi strip



HAHAHAHAHAHAHAHAHAH Oo. Oo. Oo. Oo.

dude, nice #'s :--) :-laf :-laf :-laf

 

[WDimig]

what he said!

by the way what was the correction factor in that run? :-laf

 

[lmills]

correction factor 2. 0 :-laf