2nd Gen Non-Engine/Transmission Cruise control not working, Any input?

[PWeber]

The green light come on and off fine. Cannot set it at any speed though. The horn works fine. Any other items I should check?

 

[bmoeller]

First place to check- vacuum line to the cruise servo or cruise servo. The driver-side batt. sits over them and the acid gets to them. That's what's wrong with mine.

 

[Paul Somers]

Check brake light switch on brake pedal. If mis-adjusted, cruise control will think brake is depressed and disable cruise. Even if your brake lights are comming on, check. Some of these switches are dual purpose. One side for brake light and other for cruise.

 

[Chipstien]

Could it be a clockspring?

 

[RO'neal]

Originally posted by bmoeller

First place to check- vacuum line to the cruise servo or cruise servo. The driver-side batt. sits over them and the acid gets to them. That's what's wrong with mine.

Mine too...

 

[MPBerk]

When I set for 65, it slows to approx 55mph then it slowly returns to the 65mph I org set for. Wife was driving the I-5, said that if she left her foot on the pedal for 10 sec or so, then it would set. It appears to have not logged any codes either..... any/all ideas welcome.



This is a bit frustrating i'll say. Really have no desire to call the stealer until I have too.



MP





* * *



I would respectfully request you avoid the generic reference, "stealer. " Please feel free to post experiences - good or bad - in detail.



Thank you.



Robin

TDR Admin