Here I am

CT Coffee Nites '06 Check in on what's happenin'

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Possible Northeast TDR dyno day, lets set it up.

OK tim were sorry

PRattenbury said:
Matt, what'd you do? Get a lift kit?



yeah just a simple one. 2" add a leafs for the rear. 2" leveling kit in the front with new control arms and 4 new much needed shocks. I am just waiting for the add a leafs to get delivered.
 
So Matt, at the end of the adventure you'll still have the front end lower than the rear of the truck? Well, at least you won't have my situation where the front is a CH higher than the rear. :eek:



Moose, the P-pump is up and running. Needs some fine tuning still, though. Got a lope at idle in gear.
 
Moose00 said:
Did not see you Friday, Figuired that some one needed a strip shearch :confused:



I should be around sometime in Dec, doing the x-mas lights and other fun holiday things :{ WarPig did you ever get that box figured out?
 
Mark, let me know if you want the brackets mailed out, if not I will bring em to Hooters, I have the 5 inch clamp for the bottom of the stack.
 
Warpig said:
I think so. I turned my box down to 50% and the Smarty to SW3. Also, I should have a II Silver Bullet 64 soon :D



Wonder who said you should turn the box down?????????????????? :-laf



Jim, what happend to the stack? Mark says he never got it :D
 
I'm BAAAAACCCKK!! No major issues other than the alternator crapping out 20 minutes after I left where I was staying-however it was in front of an Autozone, and a very important bolt falling out of my throttle linkage in the middle of the night in Thomson, GA-in front of a Best Western with vacancy, my trip was enjoyable and uneventful-FYI the bolt that holds the throttle linkage together back under the stock fuel filter location is the same as the one holding the oil filler tube, now it's time for a KDP party and injector o-rings!
 
Back
Top