CT Coffee Nites '06 Check in on what's happenin'

[therabbittree]

Got the new ride the other day i need to swap my parts from my '89 to the '96 5spd . . ie guages and rims a 5" remote exhaust brake... . maybe astack. . mummn at least remove the muffler it has a4" banks exhaust on it already. . how far can i take it before i need to firering and do a clutch. . i have 370s, laser dvs, and #4 plate sitting here, for it. . from what i hear thats too much for stock parts... hehe

hopefully i can cruise it over soon.

later

Deo

 

[ToolManTimTaylor]

Mark, I will give you a program that has the hack built in so that you can use the cable ... Unauthorized



Deo, With 370's and a #4 puts you in that area. With those Delivery valves *I* would do a 4GSK as well. :{ Kepp you foot out of it until you can STUD AND MLS gasket the head. O-Ring if ya want but fire ringing is proving itself to be for the pullers that start off @ 1600* f :-laf

 

[therabbittree]

MUMMN i do also have 4k spring kit and a set of 60lbs springs too. . , will a stud job and a mls 3rdgen gasket hold well if i do a small towing type twin setup. . with my hx55 as the big one?... ands hx35 as the small. man these 2nd gen engine compartment are a lot smaller ha. . man i'm used to sitting in teh fender well or knewwling on the rad support to work on em hahah. . i'll get the hang of it. . i want to do the kdp and front main seal soon too . . today its gauges and maybe a cat and mufflerrectomy...

let me know more on the mls gasket . .

thanks

Deo

 

[JLEONARD]

mufflerrectomy

That's funny :-laf :-laf

 

[DJMicko]

I got the truck back and will be parting it out everthing must go



-- email address removed --

 

[TORQUE THIS]

Got my Garrett BB Water Cooled turbo today, need to paint it and get it installed!!!

I do need a 4" downpipe with the stock 35 end... (found one)

 

[Signal73]

Anyone know if his 01 bumper will fit my 95? Dan, you've got mail.....

 

[therabbittree]

Dan,

I sent ya email about parts I'm interested in a bunch and I think my dad could use the trans. What year was the truck?. . what gears did your rears have? I'm looking for 355's . . interested in your turbo, wheel well liners, fog lights, possible rear brakes, maybe the broken stack exhaust etc etc... . Let me know

Thanks

Deo

 

[Moose Truck]

OK, OK, JLeonard, What's the Secert for get into the Readers Rigs? Must be 3 or 4 Times in the past 12 Months. Must be clean livin' Moose00 Oo.

 

[JLEONARD]

Must be clean livin'

Then you've got the wrong man officer!!!! :-laf :-laf

 

[TORQUE THIS]

Anyone have anything to work on Friday night?

 

[TnLRacing]

Danny You have an E-mail, also if anyone has any questions about his transmission feel free to PM me

 

[Stark_Ent9802]

i would like to install my 4" turbo back Exhuast if its ok mark.

Mike I p. md ya

 

[therabbittree]

I pmed ya TnL... . haven't heard from Dan yet. thanks

Deo

 

[TORQUE THIS]

i would like to install my 4" turbo back Exhuast if its ok mark.
Mike I p. md ya

No problem, I have some turbo parts to paint...

 

[ToolManTimTaylor]

Hope I can make it Friday nervous as hell as I go under the knife @ 2:30 Friday for the wrist :{





The Book thing is out of the Q I guess. It's actually surrounding a tendon :Yuk: and as of now it hurts like bloody Freakin 'ell MMmmmmm Oxycodone #ad

 

[therabbittree]

good luck , I hope for the best tendon and tears etc take the longest time to heal or feel good again. . which wrist is it?... and are you left or right handed?... oh well you could always do the stranger thing...

later

Deo

 

[TORQUE THIS]

Hope I can make it Friday nervous as hell as I go under the knife @ 2:30 Friday for the wrist :{

Good Luck Pal!

Under the knife?? How will they work on your wrist like that?? I'd be nervous too, maybe it's time for a second opinion????? :-laf

 

[Headshot zod]

I wouldn't be nervous either. Jleonard and I will be there giving all sorts of suggestions to the doctors.



"Hey J, look what happens when we add some voltage to this nerve over here"







Best of luck from the NJ crowd... ... .

 

[Moose Truck]

Knife???

Hope I can make it Friday nervous as hell as I go under the knife @ 2:30 Friday for the wrist :{







#ad

Knife?? Use a Chisel!!!