Cummins parts dealer

[GFreshour]

I want to buy an extra fan belt for my 06 w/jake brake, local 5 star is a rip off, does anyone have an internet address where I can get a belt without being ripped off? Thanks

 

[VTomasso]

http://genosgarage.com



always my first choice for maintenance items.

 

[GFreshour]

Genos

$79. 95 for a fan belt seems a bit much to me :--) anyplace else?

 

[MGunville]

I bought one at the local NAPA when I needed one for my 03. They had them in stock and from what I remember about $35-$40, Canadian $$ mind you.

 

[Jengle]

$59 for a Gatorback, at the local Autozone.

 

[MChessick]

If you are running a jake like I am, bend over, its going to hurt. $70. 00 on the low end of the scale for this belt. It took me forever to get the correct one. I tried dealers, auto shops etc, nobody had it listed. Seems to be easier to get one now but the price still sucks. I kept the old one for a spare.

Save your pennies.



Mark

 

[BHaden]

You may already have done so, but if you look on the belt, the length should be printed right on it in millimeters or inches. "965" would be 965mm or 665 would be 66-1/2 inches. If in doubt, use a tape measure to get the approx length. If you have that number and the number of ribs they can pull a part off the rack rather than look up the listing specifically

 

[jelag]

BHaden has the answer... . also some industrial suppliers carry them... large bearing houses... applied industrial technology is a national firm that has a good supply... . Though the auto zone etc will be the best priced. .