Danin/Di-Pricol Gauges

[BarlowCummins]

Does anyone know if Danin/Di-Pricol makes a oil temp gauge or oil pressure? I want to add a three gauge windshield pod and I already have egt,boost, soon rail pressure on the pillar. What other gauges should I get, I really want to stick with the Danin/Di-Pricol brand.

 

[ENafziger]

I'd like to know too. From what I'm told, you can use the trans temp for oil temp, and 0-100psi fuel gauge for oil pressure... but it would be nice to have the labels right!

 

[DaveHess]

I have the white face DiPricos and went with the Autometer Phantoms for oil temp and oil pressure. I like the lighting better on the Autometers. Just my . 02

 

[Mark Craig]

CoreyCunningham,



Currently they do not offer those gauges, new items are alwaysunder development like the new fuel rail pressure gauge that just came out at all times. I don't have a confirmation of if or when but it would make sense to have them in the future. Check out the Auto Meter or Isspro if you need to have them now and can't wait 3-6 months for the possibility that DiPricol will make them.



Mark @ DPPI

 

[HeavyHauler]

Di/Pricol used to make a differential temp gauge in the white face series.

 

[BarlowCummins]

I know they make a fuel pressure gauge, are there any real benefits to a fuel pressure gauge on a 3rd gen? I will be getting a rail pressure gauge soon, would it make sense to have both?

 

[Mark Craig]

HeavyHauler,



They still do in fact they now have 90 degree sweep and the 270 degree sweep stepper motor style trans temp gauges in both black and white faces. We stock them all.



Mark @ DPPI

 

[Parks]

They did make a differential temp gauge for the older style gauges but not for the new Optix gauges.

 

[BarlowCummins]

Ok, I have been waiting almost two years for more optix gauges and now I have seen them in a tdr mag and on the danin website. However, I still can't find where to buy them. I really want an optix oil pressure and diff temp gauges. Does anyone know where to get them?

 

[Ducman82]

i was in the same boat. i wanted oil temp and pressure, but i had to go with Autometer Ultralite II. Love the lighting and they work great.

 

[AH64ID]

I think I read last week that they are now shipping the oil psi gauge... but its a short sweep mechanical... which SUCKS. .

 

[Tinman]

I used the 100psi fuel pressure gauge for oil pressure and the 90* sweep trans temp for engine oil temp. (The 270* sweep trans temp works best for trans temp). They work just fine but it would be nice to have them labeled correctly. I know what they are but it really would confuse someone else. I guess you have to decide what bothers you the least; different gauge series or miss labeled gauges. I choose the later. It seems to me it'd be easy enough for Di-Pircol to re-label some gauges or offer a label kit for the end user.

 

[JDerbedrossian]

I swear I thought I saw them advertising a water temp and oil press gauge in TDR mag. Maybe two issues ago.



Jake

 

[Tinman]

They did offer a oil pressure gauge at one point. I ordered one from Geno's. It was back ordered for the better part of 6 months. They looked into it for me and it turns out Dannin kept getting the gauge from the factory in China with something wrong with them. After 3 or 4 bad batches, Dannin gave up and will not be offering them anymore. I don't know about the water temp. Geno's was very nice, even though they had nothing to do with the probelm. They gave me free shipping for the other gauges I order to replace the one that never came.