Dash Mount Gauges

[phicks]

I'm looking at installing 3 gauges using the Dash Mount. Any members out there done this on a 2004. 5? How are wires run from gauges through dash?

 

[ETurner]

Dash Pod

I had the dash pod from geno's installed on my 03. The installer didn't say he had any problems hooking them up. I love them up on dash. First I had them in the empty cubby under the radio,I couldn't see them very well so I had them moved. Put them on top of dash you'll have a good line of sight. Hope this helps.

 

[phicks]

ETurner, how did they get wires through the dash?????

 

[KBennett]

I had the dash pod from geno's installed on my 03. The installer didn't say he had any problems hooking them up. I love them up on dash. First I had them in the empty cubby under the radio,I couldn't see them very well so I had them moved. Put them on top of dash you'll have a good line of sight. Hope this helps.

Do you have any pictures?

Do you know what brand mount they used?

Thanks

 

[phicks]

ETurner, how did they run the wires from gauges, did they drill a hole in the top of your dash?? Did they run the wires across the dash, got any pictures??

 

[WMcGuire]

I mounted my prodigy brake control in the cubby hole, drilled a hole in the left side near the back of the hole, dont try to drill straight in, theres no clearance in back, use a single wire to fish your wires through, should work for gauges if you ar carefull with that drill.