dipricol rail pressure gauge install HELP!!

[NRussell]

Need help with something. The sender harness from rail to inside truck has a green wire and a black wire with no 2-pin amp connector, just the green andblack wire. My question is what is the matching color?

The gauge harness has a blue and black wire in a 2-pin amp connector, which of the green and black wires from the sender harness goes to the black or blue wire from gauge harness??!!

 

[Ducman82]

did you get it new?

 

[NRussell]

Yes, everything was in sealed & labeled DANIN bags.

 

[Ducman82]

hummmm... ... ... ... . mine had the connector... ... . i belive its blue to green for the sender...

 

[NRussell]

Are u for sure on the match? Because the directions say one wrong connection and big problems! Thanks for your help

 

[Ducman82]

ill try to find the instructions online again. . found them once

 

[Ducman82]

should be... . white 12v lights, gray is ground for light..... black goes to black to sender and blue goes to green to sender , and red is switched 12v

 

[NRussell]

Thank u sir

 

[JJPage]

Need help with something. The sender harness from rail to inside truck has a green wire and a black wire with no 2-pin amp connector, just the green andblack wire. My question is what is the matching color?

The gauge harness has a blue and black wire in a 2-pin amp connector, which of the green and black wires from the sender harness goes to the black or blue wire from gauge harness??!!

Mine came the same way#@$%!, Bryan, from Diesel Power Products, delivered the correct harness, TO MY HOUSE. Plug and play.