DiPricol ?

[Scrappy]

I have a three DiPricol gauges(boost, pyro, & Fuel psi) they have been installed for a while but I think that I have an issue with the fuel. I bled the gauge as best as I could(no instructions with it), but I am only seeing about 7-7. 5 psi at idle on the gauge. How can I bleed the gauge or is my LP dying?

 

[banshee]

Scrappy,



That's all my stock LP would give me via my DiPricol, too. I verified it with a certified mechanical gauge as well. I had the gauges on within the first 1000 miles, so that seems to be all they put out. It dropped to 4 at WOT.



John

 

[Jengle]

An article in one of the last two TDRs said the pump itself is only a 10psi model. So, measuring post filter, that would be pretty close. I get about 7. 5-8 at idle and can pull it down to 5 at the lowest, with a load at WOT. No performance mods as yet.

 

[mbaston]

I see the same and can actually pull it down to 0. The EZ might have something to do with that.