Here I am

Dirty Evap

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

03 needs U-Joints

Drivers door trim gooey

Status
Not open for further replies.
I had noticed I had limited volume out AC vents. Blower was blowing hard so I pulled it and the evap core is extremely dirty. What is bestand easiest way to clean it?

55179A47-AE55-44FD-92DF-7A75B93121BC.jpeg
 
If you pulled the dash - out a new one in, OEM please because they last.

I cleaned mine within the dash through the fan opening with simple green, water spray and a small vacuum cleaner attachment. Worked out good.
 
If you pulled the dash - out a new one in, OEM please because they last.

I cleaned mine within the dash through the fan opening with simple green, water spray and a small vacuum cleaner attachment. Worked out good.
I went to Lowes and got a can of coil cleaner. I sprayed it heavily, let sit for 20 minutes, sprayed with jet stream nozzle. Got it looking pretty good. So I sprayed the cleaner again and put back together. Where I was getting only about. 220 ft/min flow on hi I am getting around 610 on hi at all 4 vents.

BA4B80AD-114F-444F-9610-4953316B7E62.jpeg
 
Status
Not open for further replies.
Back
Top