2nd Gen Non-Engine/Transmission Does anyone build an aliminum tool box that will work around stacks?

[BILLVO]

Does anyone build an aluminum tool box that will work around stacks?

I am considering a set of 5" mitre stacks and was wondering if there is a company that builds an aluminum tool box that has the corners cut out so the tool box can still sit against front of box?Box space and a tool box are a must for me. I already have a box that I will probably just have the front corners cut and flipped and rewelded in.

 

[wtfd6]

I am thinking stacks too. I also like the idea of not having to move the tool box back.


mark

 

[Rattler]

When i was looking into stacks i was thinking about trying to use an in-bed style toolbox designed for a small truck. I figured i could put it between the stacks and up against the bed front while setting it just above the stack box. Randy

 

[Got Smoke?]

A few years back at Thunder In Muncie there was a guy with a newer model 2nd Gen shortbed that had stacks. He took a chest style toolbox that would be bolted to the floor, cut the back corner out that would hit the stacks, flipped it and had it welded back in place. Pretty slick looking!



But ya gotta know someone who can weld aluminum.

 

[cfullman]

Custom Built Toolboxes

This is my first post, so bear with me. I designed a custom toolbox for my Honda EU3000 generator and I had it manufactured by a company advertised as Highway Produsts at 1-800-TOOLBOX. I believe that is their phone number and internet site. They did an outstanding job. They will build any toolbox design you require, however, they are not cheap. If you are willing to spend the bucks they will build it.