2nd Gen Non-Engine/Transmission drag link adjustment bolt size

[JCyrbok]

Anyone know off the top of their heads what size the bolts are on the clamps for the drag link adjustment sleeve? I have to adjust my steering wheel after installing a new track bar. Looks like I need a deep well socket and would rather make the tool run (if needed) prior to climbing under the truck and after LOL. My bones still ache from laying under there the better part of sunday doing the R/R on the track bar.



Thanks



J-

 

[Nate]

15mm I think. 9/16" might fit too. Just use a wrench.

 

[JCyrbok]

Cool thanks Nate, for some reason 15mm jogged my memory.



Thanks for the quick reply,



J-

 

[JCyrbok]

One more quick question. Do the clamps rotate independant of the sleeve or are they welded on? Does it matter where the clamps are positioned in relation to the slit in the sleeve?



J-

 

[Nate]

The clamps move around. I usually put the bolt part over the crack in the sleeve, but do be careful that it's not going to hit on that front crossmember, or anything else.

 

[JCyrbok]

thanks Nate, i was concerned about interference.



J-