DRB II to actaute lift pump

[PCline]

I'm getting ready to install a fuel pressure gauge so I was reading through my manual to famalarize myself with the system.



The manual makes the following statement about priming the system:



Cycle key to actuate transfer pump or use DRB II scan tool to actuator transfer pump.



Anybody know how to do the above with the DRB II tool? Seems like it would be very handy for checking for leaks, troubleshooting, and checking on lift pump performance.

 

[MCrossley]

it is under the ECM actuator test if I am not mistaken you just dig down until you find the transfer pump under the actuator tests and click on it and it will cycle it. you can do that with just about anything on the truck that is computer controlled.