2nd Gen Non-Engine/Transmission DSS and Kore HP Leveling Kit

[Diesel Gunner]

Well, I installed the Kore HP Leveling Kit and had to take my DSS off. With the 2" stabilizer bar lowering blocks the DSS no longer fits.



Have any of you run into this and did you figure out a mod to allow the use of the DSS. It looks to me that it can be done with some modification to the DSS to relocate the support bearing. Might require addition of gussets to keep the bearing support plate from flexing. Any ideas would be appreciated.



If you have modded this, perhaps a photo or two would help clarify.

 

[Regcabguy]

Carli links.

Well, I installed the Kore HP Leveling Kit and had to take my DSS off. With the 2" stabilizer bar lowering blocks the DSS no longer fits.



Have any of you run into this and did you figure out a mod to allow the use of the DSS. It looks to me that it can be done with some modification to the DSS to relocate the support bearing. Might require addition of gussets to keep the bearing support plate from flexing. Any ideas would be appreciated.



If you have modded this, perhaps a photo or two would help clarify.

Chuck the Kore blocks,reinstall the DSS and get some extended links from Carli.

 

[MartyK]

I have the Kore Chase suspension. I used the Defiant brace, removed the Kore blocks and went with the longer Maxx-Links from Geno's. Everything fits great and works well.



Marty

 

[Regcabguy]

I have the Kore Chase suspension. I used the Defiant brace, removed the Kore blocks and went with the longer Maxx-Links from Geno's. Everything fits great and works well.



Marty

Those are nice looking links! I hadn't seen a close-up photo of them.