Originally posted by JR2
yep... the famous words Bill K likes to throw in my face..... "I am only going to have RV 275 injectors and this little box"
I just happen to have an EZ installed and new 275's in a Box waiting for transmission work... I feel so transparent and corrupted!
Here is an email I sent yesterday to Piers... . Your opinions welcomed
-------------------------------------------------------------------------------
Hello all,
I have been talking and reading trying to decide my "next steps" for the perfect setup for my truck.
Currently I have these additions to my...
2002 CTD, 47RE-Auto, 3. 54 gears
Gauge's DiPricol fuel press, boost 0-35, EGT, Trans Temp.
4 inch exhaust.
BHAF with SS heat shield.
EZ installed.
275RV new in the box - un-installed for after transmission work.
Making arrangements for DTT 89% "H" with Tow Valve body.
Usage is 95% daily driver some towing in the 8500lbs range in the mountains.
Because I live at 5K feet and drive between 5K and 6. 5K+ feet daily and a great deal of Denver traffic, smoke control is important to me.
I have decided on the PDR HX35 but am unsure if the $650 includes the exhaust housing? either way I am unsure if I should get a 12cm or 14cm waste gated or not?
I will probably want try larger injector down the road if smoke is manageable with the 275's maybe even more or different electronics and a cam down the road after saving some more $$'s
If the turbo will support 350HP what boost numbers are we talking with 275's or larger mid-range 80hp type injectors?
am I on the right track?
Also are there any books that explain turbo air flows, how different injector effect turbo lag, and how to make this performance parts balancing act work the first time?
I've driven a truck with a Tight DTT transmission (89%/TowVB) large injectors EZcomp box and a PDR HX40 at my altitude... great truck but to much smoke for my Denver traffic driving. Any suggestions would be greatly appreciated.
Thanks for your time
JJ
Jim Johnson