Dual fuel filter setup on 04.5 shortbed?

[Superdawg]

Sorry if this has been answered.
I saw the 6 page saga of installing the CumminsCatfuelfilter on a short bed and it doesn't look appealing.
Anyone install the dual filter setup from Glacier Diesel or from someone else on a shortbed?

 

[Superdawg]

I ended up ordering the Glacier Diesel Power, single filter APPS mount. If I decide to add a water separator later, it will be easier to fit in a single mount for the short bed.

 

[AaronOregon]

I just jumped over to the 6 page post you are referring too. You realize that post is over a year old and they have made a couple changes to better the kit correct? They now have a bracket that fits both the long and short bed trucks. I don't understand why some guys have trouble installing this on the short beds. We have them on 6 short-bed work trucks (13 trucks total) and they are perfect. If you angle the fittings the correct way and cut the fuel line to the length you need it, they work perfect. I don't get it? You have to understand you are dealing with less room under there on a short bed.....No big deal at all though.

 

[Wingate]

That was my 6 page SAGA from a year ago...I wouldnt have a problem installing the CumminsCat Filter setup again especially now that they ahve made updates to the mounting bracket. I would love for someone to post a pic of the updated mounting bracket though.

 

[AaronOregon]

That was my 6 page SAGA from a year ago...I wouldnt have a problem installing the CumminsCat Filter setup again especially now that they ahve made updates to the mounting bracket. I would love for someone to post a pic of the updated mounting bracket though.

The bracket looks the exact same as the old one, but is just a bit smaller pulling the filters out away from the tank by an inch or so. I will try and get a picture for you.

 

[Superdawg]

Rats. Thanks for the info Aaron. I would have liked to have the dual filter setup.

 

[Wingate]

The bracket looks the exact same as the old one, but is just a bit smaller pulling the filters out away from the tank by an inch or so. I will try and get a picture for you.

Kinda like moving the mounting holes forward a little? hahaha

 

[HerbW]

Have you seen the Vulcan fuel filters that mount between stock fuel filter and your CP3 pump? I put one on my truck quickly. It came with a Donaldson filter and goes on factory holes and bolts.

 

[HerbW]

Please see: vulcanperformance.com website if anybody is interested in a great filter setup. I see Dawg has already ordered one.