Dyno Day May 20th... Mike Dez Racing

[Big P]

I might be in, so might my brother-in-law. = 2 trucks

 

[Turbo Tim 1]

I might have to look into a day off! We'll see, I have to go done to Atlanta in a few weeks so we'll see what's going on after that.

 

[ToolManTimTaylor]

Tim . . Two white 01 3500's on mudders with the same plate on the same dyno? I dunno man there may be some sort of tear in the space time continum. :-laf

 

[I SPEED]

Tim . . Two white 01 3500's on mudders with the same plate on the same dyno? I dunno man there may be some sort of tear in the space time continum. :-laf

Okaaayyyy there Doc Brown... we're driving Dodge trucks, not DeLoreans.

 

[HoleshotHolset]

I'll let my old man know about this... he's been itchin' to dyno the old 12-valve plow truck.



Matt

 

[ToolManTimTaylor]

No really NS4 check it out, Tim has an 01 white 3500 with NY plate "GotDzl" and has BFG mud terrains on it.



My Rig an 01 3500 ct plate "GotDzl" and wears mudders and is white. Oh and we run the same stuff too :-laf

 

[TORQUE THIS]

Oh and we run the same stuff too :-laf

Well aren't you just fhakin special... :-laf

 

[I SPEED]

No really NS4 check it out, Tim has an 01 white 3500 with NY plate "GotDzl" and has BFG mud terrains on it.



My Rig an 01 3500 ct plate "GotDzl" and wears mudders and is white. Oh and we run the same stuff too :-laf

Wierdo... .

 

[Turbo Tim 1]

Yeah, but somehow Toolyman got some new doors and mine are showing some rust, so his truck is better looking than mine right now. What did you do for that service manager to get new doors anyhow? Nevermind, I probably don't want to know! :-laf

 

[I SPEED]

Yeah, but somehow Toolyman got some new doors and mine are showing some rust, so his truck is better looking than mine right now. What did you do for that service manager to get new doors anyhow? Nevermind, I probably don't want to know! :-laf

Mines going in for new doors next week... Oo.

 

[ToolManTimTaylor]

Wierdo... .

Mines going in for new doors next week...

Who's the weirdo now copycat :-laf :-laf

 

[TORQUE THIS]

Geez... I just found out today that I have to do something on the 20th at church... :{

That'll teach me to check my calendar a little better...

 

[HoleshotHolset]

Dad got his 12-valve running again after recently blowing the head gasket in multiple places. So, he's really itching to make it on the rollers.



He o-ring'd the head himself and used a stock Cummins gasket with 12mm ARP studs.



Many thanks to Scott @ Massdiesel for helping Dad out with this!



Matt

 

[TClemens]

So where is this event taking place? and what time should I arrive?

 

[Moose Truck]

So where is this event taking place? and what time should I arrive?

For Direction Click Here:

https://www.turbodieselregister.com/forums/showthread.php?t=128106&page=1





Last year some of us meet at the Milford Truck stop and took a cruise down there. Moose00

 

[Signal73]

So where is this event taking place? and what time should I arrive?

From your location, I would think you would do the 84 to 395 route? If so we stop off at exit 90 (around 9ish?) after leaving milford, so probably be cool to meet there and convoy in.

Jim

 

[TORQUE THIS]

9 from the Hartford area is much better than 395... ask ToolMan... :-laf Right off exit 90 to the left is a gas station / Dunkin Donuts.

 

[ToolManTimTaylor]

ask ToolMan... :-laf .

How 'bout we don't :-laf :-laf

 

[JLEONARD]

I won't be able to make this one. . will be running the "new" boat from Rochester to Mystic. Let's see... on the 20th we should be about in the Hudson River by then if everything is going ok.

Hope everybody has a good time and the numbers are up there!!!

Jay

 

[TORQUE THIS]

Just bringing this back to the top...

Just over a week away...

Please post if you are able to make it and are going to dyno. We need at least 15 trucks!!!!

Would like to let Scott know who will be attending by the end of the week.

I am still on the fence about being able to make it...