Dyno Numbers with Smarty...

[jwilliams3]

#ad


Was hoping for 600 but ran a little short.

The best run was with just the SMARTY on 9 and the TS box on about 20%.



We turned the TST on and started to lose a little power but it kept up the power in the later rpm's. . (good info!). The 2nd run was with the TST box on level 2x1.



This was with 12psi fuel pressure :-laf



THANKS DAVID AND COMPANY FOR THE OUTSTANDING WORK ON THE DYNO AS ALWAYS!!

 

[Diesel Power]

you need about 45psi of fuel pressure @ the cp3 to get the power your looking for. also the stack of timing and duration boxes are very limited to power production, and can be very dangerous--650 hp is the most i've heard of. you need a pressure box to get any more power.

 

[jwilliams3]

Wade have you dynoed yours with the mods?

 

[Luken]

you need about 45psi of fuel pressure @ the cp3 to get the power your looking for. also the stack of timing and duration boxes are very limited to power production, and can be very dangerous--650 hp is the most i've heard of. you need a pressure box to get any more power.

Limited to power production? I have a pressure box and it doesn't do anything compared to the other chips.



I would also like to know what your truck dyno's.



Justin,



Good #'s. What fuel pump are you running right now?

 

[jwilliams3]

Stage 2 Floort It CP3 supplied by a 150 FASS.

Increasing inlet pressure is on the list of future mods so I will probably have to get a 200gph unit or something else.

 

[lmills]

Never drop below 30

 

[Diesel Power]

Wade have you dynoed yours with the mods?

no i have not, it's been very agrevating not knowing but some of the track runs suggest around 800hp, sometime this month i will have it all figured out---hopefully, i just dont have the time for my own truck :{

 

[Diesel Power]

Limited to power production? I have a pressure box and it doesn't do anything compared to the other chips.



I would also like to know what your truck dyno's.



Justin,



Good #'s. What fuel pump are you running right now?

you also have a stock cp3

 

[Diesel Power]

Stage 2 Floort It CP3 supplied by a 150 FASS.

Increasing inlet pressure is on the list of future mods so I will probably have to get a 200gph unit or something else.

there is a kit that i have that will allow you to adjust your fass150 on the fly from 25psi to like 75psi Oo.

 

[jwilliams3]

What does the kit run? Ballpark

 

[Diesel Power]

What does the kit run? Ballpark

for you? i cant advertise so pm me please Oo.