Engine/Transmission (1998.5 - 2002) ECM needed A.S.A.P!

[Cummins724]

My brothers 98. 5 CTD 5 speed truck broke down on Saturday while driving to my home. He is getting a code P0230... Transfer pump [lift pump] curcuit out of range. The truck has a Holley blue pump using the LP harness as a triggered relay. I tried disconnecting the harness altogether & no changes. I need a ECM for this truck soon & hoping to find one local if possible for a quick install.

 

[CSnyder]

I have one from a 98. 5 5 speed but Im not local. 563-546-7772 is the quickest way to contact me.

 

[Cummins724]

I installed the ecm out of my 99 into my brothers truck today & that was the problem... . it is running great. My truck is sitting in the driveway with no brain.

 

[Gary - K7GLD]

I installed the ecm out of my 99 into my brothers truck today & that was the problem... . it is running great. My truck is sitting in the driveway with no brain.

Did you try verifying that it was actually an ECM failure, and not just a bad connector or connection? Sometimes a bit of corrosion develops in the connector, and operation is restored when it is unplugged and then re-connected - I'd sure want to verify it actually IS an ECM failure, not simply a bad connection...

 

[Cummins724]

Did you try verifying that it was actually an ECM failure, and not just a bad connector or connection? Sometimes a bit of corrosion develops in the connector, and operation is restored when it is unplugged and then re-connected - I'd sure want to verify it actually IS an ECM failure, not simply a bad connection...

I tested voltage coming from the LP harness at the ecm. My brother hit the go pedal & voltage dropped to 5v at any throttle position. I unplugged the ecm connector & cleaned it, lubed it, reinstalled it & nothing changed. I checked all grounds & checked out well. When the voltage would drop to 5v... the "wait to start" light would flash. I disabled the turbo timer taking everything back to stock making sure that this wasn't just a ignition switch problem cutting out power & nothing changed. I did this because my brother said he went to turn his truck off one day at Walmart & it didn't shut off, but he turned the key forward & it shut off. He also had code po253 show up any time temps would get below 40*f. All leads me to ecm.

 

[MAllen1]

I have one sitting here from a 99 5-speed, but, not close. 7703281062

 

[Cummins724]

I have one sitting here from a 99 5-speed, but, not close. 7703281062

I bought one from Csnyder. Thank you for the offer.

 

[darkhorse]

I bought one from Csnyder. Thank you for the offer.

Chris comes to the rescue one more time! He found a replacement truck for me when I tipped my first one over early last year.

 

[Jdonoghue]

If you still have the dead one, don't trash it, I would be interested in it.

 

[Cummins724]

If you still have the dead one, don't trash it, I would be interested in it.

I was gonna have it repaired if I could find a electronics shop that knows how, any ideas?

 

[Cummins724]

Chris comes to the rescue one more time! He found a replacement truck for me when I tipped my first one over early last year.

He sure is a nice guy! He gave me a great deal & shipped it out fast to get me on the road. Thanks Chris!

 

[JR2]

I was gonna have it repaired if I could find a electronics shop that knows how, any ideas?

You might check with Bob Wagner... . I know Marco has repaired a few ECM problems. The ECM has to go on vacation to Italy, but it will come back happy.

 

[CSnyder]

Thanks for the compliments guys! Glad I could help both of you out!

 

[Cummins724]

Thanks for the compliments guys! Glad I could help both of you out!

I installed it today, Thanks again Chris. I sent the payment on paypal.

 

[SAndreasen]

anybody have an ecm out of an automatic truck for my 01?

 

[KLockliear]

Looking for an ECM for a 2001. 5 ETH (HO). Anyone have one reasonably priced? Please e-mail for contact... keith at ws6 dot com

 

[DAWG-1]

HI,

I have a brand new ecm (Mopar performance parts). This ecm was sent to Marco and has the Catcher program. 2001 Automatic Federal emissions. My info e-mail -- email address removed -- or Home # 425-355-3915. Thanks, Sam.

 

[KLockliear]

Unfortunately, the ETC (std output, all autos and 5-speed) is different from the ETH (high output, 6-speed only).

 

[darkhorse]

I got one from these guys a couple of years ago. 2001 Dodge CUMMINS DIESEL ECM Engine Control Module 5. 9 litre i6 DIESEL It worked out fine. Not as cheap as the one I got off E-bay previously, but that source dried up quick when we started sending them to Marco.

 

[DAWG-1]

Ecm

anybody have an ecm out of an automatic truck for my 01?

The ECM I posted is programed for an '01 Automatic with federal emissions. If you need it my e-mail is -- email address removed -- or call me at 425-355-3915. Thanks, Sam.