Engine/Transmission (1998.5 - 2002) Edge EZ install on 98.5??

[snug]

Hello everyone. I purchased an Edge EZ. I have found the triangle plug, but can't find the conector for the other plug. (the smaller one)

Help!!



Thanks

Doug

 

[klaybus]

Map Sensor plug

The Map Sensor plug is located on the driver side of the engine near the firewall. It attaches at the head by the boost plug port. You have to reach way back, kinda outta sight. Use a flashlight & look hard & you will see it.

Good Luck.



Clay



Here's a link for pics & directions



http://www.edgeproductsinc.com/pdf/DodgeEZInstructions.pdf

 

[snug]

Thanks. After a few cuts on the knuckles, and a couple of cus words I was able to fit my arm into that tiny spot.

All I can say... . what a difference.



Thanks again,

Doug

 

[klaybus]

Doug,

Glad to hear you got it. Now, get guages if you don't already have them. Their important! Best of luck!



Clay

 

[JR2]

Doug,

I see you could not resist the bombing urge... . I will have to come by and give you a ride in my Dodge and talk to you about your old X. I need some bombing advice.

 

[snug]

John,



Sounds good. After hearing how easy it was to get power out of these; I had to try.

I would've done some stuff to the X, but didn't want to screw up the warranty.



Doug