Edge Juice / Attitue Purchases & Installs

[JCrockett]

"EEngel

The single screw removes the mount (it's in the factory hole). It takes about 30 seconds. Close the cap over the hole (don't bother to put the stock screw back in) and away you go. "





What about the wiring on the Attitude? JDoes it just unplug out of the back and do you stuff it down next to the A-Pillar?



Thanks

 

[dodgerep]

ROCK ON CHEVY SS!!! That is what i told the owner of a Blue SS when I blew his doors in this past sunday. I caught him at a five mile an hour roll and was able to lay into the accellerator just in time to builtd my thrust up before he realized he was actually going to get beat. Once you are in front of them, it is hard for them to catch you. Guy said he was impressed that a 3500 Quad Cab Diesel could put out that kind of performance, to which I simply replied... " You aint a real truck guy are you?" That is DODGE LIFE!!!

 

[EEngel]

Wire

JCrockett,



When you unplug it from the Edge head unit, you can pull it through the firewall hole. The wire is on the outside of the stock pillar and inside the cover piece.



I left a message with edge to see if you could put a quick disconnect on the wires to the monitor only. We will see what they say.



The service manager at my local shop is the one who suggested an edge on my truck, so I don't think I will bother pulling it out when I go in.

 

[EEngel]

dodgerep

Dodgerep,



I run down to Marinette WI a few times a year. I think I will need to look on mapquest and see if I go by your town.

 

[Mark Craig]

EEngel,



Excellent pics, really shows the Attitude off!





Mark @ DPPI

 

[DarkRAM]

any info mark?

Mark, have you any information about the EDGE's A2?

 

[Mark Craig]

DarkRAM,



Yes they are getting them done but no time frame I have for you. I would suspect 6 months if I had to guess. Supposed to be approx 1500. 0-1800. 00.



Mark @ DPPI

 

[GPitts]

Where did you find the AFE proguard intake for your 05... ... I can't find one anywhere?